Extender Network Settings
27
AC750 WiFi Range Extender
Use WPS With the Push Button Method
For you to use the push button method to connect a WiFi-enabled computer or mobile device
to the extender WiFi network, the computer or device must include a physical WPS button or
an onscreen WPS button that you can click.
To use WPS to add a WiFi-enabled computer or mobile device to the extender’s WiFi
network:
1. On your WiFi-enabled computer or mobile device, open the WiFi connection manager
and locate and connect to the extender WiFi network.
2. Launch a web browser
.
3. Enter www
.mywifiext.net in the address field of the browser.
A login window opens.
4. Enter your user name and password.
The Status page displays.
5. Select Do More > Connect Devices (WPS).
6. Leave the Push Button (recommended) radio button selected.
7. Click the WIFI PROTECTED SETUP (WPS) button.
For two minutes, the extender attempts to add the WiFi-enabled computer or mobile
device to its WiFi network.
8. Within two minutes, go to the WiFi-enabled computer or mobile device and press or click
its WPS button.
9. T
o verify that the WiFi-enabled computer or mobile device is connected to the extender
WiFi network, select Settings > Connected Devices.
The WiFi-enabled computer or mobile device displays on the page.
To Next Page
Loading...
