Supplemental Information
48
AC750 WiFi Range Extender
Factory Default Settings
The following table includes the factory settings for the extender. You can use the Factory
Reset button or by logging in and clicking a RESET button to return the extender to these
settings. (See Return the Extender to Its Factory Settings on page 40.)
Table 2. Factory default settings
Feature Setting
Setup Wizard Enabled
WiFi communication Enabled
WiFi network names (SSIDs) NETGEAR_EXT
Security Disabled
Transmission speed Auto
1
1. Maximum wireless signal rate (IEEE Standard 802.11). Actual throughput will vary. Network conditions and environmental
factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data
throughput rate.
Country/region Varies by region
Operating mode 802.11a/b/g/n/ac
Data rate Up to 300 Mbps for 2.4 GHz network and 433 Mbps for 5 GHz network
DHCP Client enabled
Technical Specifications
The following table includes the product specifications.
Table 3. Technical specifications
Feature Description
Network protocol and standards
compatibility
Data and routing protocols: TCP/IP, DHCP server and client, DNS relay
Power consumption 100–240V, 50/60 Hz, 0.16A maximum
Physical specifications • Dimensions: 122 x 74 x 38 mm (4.8 x 2.9 x 1.5 in.)
• W
eight: 213 g (8.15 oz)
To Next Page
Loading...
