Extender Network Settings
33
AC750 WiFi Range Extender
2. Power on the extender and connect all of your WiFi-enabled computers and mobile
devices to the extender.
3. Make sure that the Link Rate LED remains lit.
4. Log in to your extender:
a. Launch a web browser.
b. Enter www.mywifiext.net in the address field of the browser.
A login page opens.
c. Enter your user name and password.
The Status page displays
5. Select Settings > Connected Devices.
The Connected Devices page displays the MAC addresses and virtual MAC addresses
for WiFi-enabled computers and mobile devices that are connected to the extender
network.
6. On the router, add the extender’s virtual MAC address and the virtual MAC addresses of all
devices that are connected to the extender network to your router’s MAC filter table.
7. Enable the router’s MAC filter, WiFi access control, or ACL.
To Next Page
Loading...
