NETGEAR FS605 v3 User Manual

Installation Guide
Fast Ethernet Switch
10/100 Mbps FS605 v2/FS608 v2
Technical Support
PLEASE REFER TO THE SUPPORT INFORMATION CARD THAT SHIPPED WITH
YOUR PRODUCT.
By registering your product at www.NETGEAR.com/register, we can provide you with faster
expert technical support and timely notices of product and software upgrades.
NETGEAR, INC.
Support Information
Phone: 1-888-NETGEAR (For US & Canada only) - 24 x7 phone support
See Support Information card for other countries.
E-mail: support@NETGEAR.com (24 x 7 online support)
www.NETGEAR.com
© 2003 NETGEAR, Inc. NETGEAR, the Netgear logo, The Gear Guy, Auto Uplink and
Everybody's Connecting are trademarks or registered trademarks of Netgear, Inc. in the
United States and/or other countries. Microsoft and Windows are registered trademarks of
Microsoft Corporation in the United States and/or other countries. Other brand and product
names are trademarks or registered trademarks of their respective holders. Information is
subject to change without notice. All rights reserved
August 2003
M-10160-01

NETGEAR FS605 v3 Specifications

Summary

Introduction

Installation Overview

Provides a step-by-step guide to setting up the NETGEAR switch, estimating a 5-10 minute installation time.

Unpack the Box and Verify the Contents

Prepare to Install the Switch

Install the Switch and Connect the Other Devices

Troubleshooting

The Power light is not lit

Addresses issues where the switch's power indicator light does not illuminate, suggesting checks for power connections and adapter usage.

Port light issues

Covers scenarios where port lights remain off or continuously lit, indicating potential connection problems or device status issues.

Technical Specifications