Need help?Do you have a question about the NETGEAR ProSafe FS728TP and is the answer not in the manual?
General| Model | FS728TP |
|---|---|
| PoE Ports | 24 |
| PoE Budget | 192W |
| Switching Capacity | 12.8 Gbps |
| Forwarding Rate | 9.5 Mpps |
| MAC Address Table Size | 8K |
| VLAN Support | Yes |
| QoS | Yes |
| Rack Mountable | Yes |
| Jumbo Frame Support | Yes |
| Power Supply | Internal |
| Humidity | 10% to 90% non-condensing |
| Management | Web-based, SNMP |
| Dimensions | 440 x 43 mm |
| Operating Temperature | 0°C to 40°C |
| Weight | 3.7 kg |
Details on storm control, port security, RADIUS, and TACACS+ authentication.
Configuration of port parameters, Link Aggregated Groups (LAGs), and LACP.
Management of VLAN properties, membership, and PVID settings.
Settings for SNMP engine ID, users, groups, views, and communities.
Procedure to restore the device to its original factory default configuration.
To Next Page
