FS728TP Smart Switch Software User Manual
Configuring the Device Using Your Browser 5-90
v2.0, November 2006
Defining QoS Queues
The Queue Page contains fields for defining the QoS queue forwarding types.
To set the queue settings:
1. Click Switch > QoS > General > Queue. The Queue Page opens:
Figure 5-58
The Queue Page contains the following fields:
– Strict Priority – Specifies whether traffic scheduling is based strictly on the queue
priority.
– WRR – Assigns WRR weights to queues to prevent a specific application from
consuming all of a port's forwarding capability. The queue weights are preconfigured and
are set to 0,2,4, and 7.
2. Select Strict Priority or WRR Fields.
3. Click . The queue settings are set and the device is updated
To Next Page
Loading...
