FS728TP Smart Switch Software User Manual
5-101 Configuring the Device Using Your Browser
v2.0, November 2006
Defining SNMP Groups
The Groups Page provides information for creating SNMP groups and assigning SNMP access
control privileges to SNMP groups. Groups allow network managers to assign access rights to
specific device features or feature aspects.
To define an SNMP group:
1. Click Switch > Advanced > SNMP > Groups. The Groups Page opens:
The Groups Page contains the following fields:
– ID – Indicates the Group ID table entry number.
– Group Name – Displays the user-defined group to which access control rules are applied.
The field range is up to 30 characters.
– Security Model – Defines the SNMP version attached to the group. The possible field
values are:
– SNMPv1 – SNMPv1 is defined for the group.
Figure 5-66
To Next Page
Loading...
