FS728TP Smart Switch Software User Manual
5-107 Configuring the Device Using Your Browser
v2.0, November 2006
Defining SNMP Communities
Access rights are managed by defining communities in the SNMP Communities Page. When the
community names are changed, access rights are also changed. SNMP communities are defined
only for SNMP v1 and SNMP v2c. To define SNMP communities:
1. Click Switch > Advanced > SNMP > Communities. The Communities Page opens:
Figure 5-71
The Communities Page is divided into the following tables:
– Basic Table
– Advanced Table
SNMP Communities Basic Table
The SNMP Communities Basic Table contains the following fields when using SNMPv1 and
SNMPv3:
– ID – Indicates the SNMP table entry number.
– Management Station – Displays the management station IP address for which the basic
SNMP community is defined.
To Next Page
Loading...
