FS728TP Smart Switch Software User Manual
Getting Started 2-4
v3.0, November 2006
Network without DHCP server
A static IP address can be assigned to the FS728TP device, even if the network does not have a
DHCP server.
1. Connect the FS728TP switch to your existing network.
2. Power on the FS728TP switch by plugging in a power cord.
3. Install the Smartwizard Discovery program on your computer
4. Start Smartwizard Discovery. (Chapter 3 has detailed instructions on the Smartwizard
Discovery)
5. Click Discover for the Smartwizard Discovery to find your FS728TP switch.
6. Click on Configuration Setting (See Figure 2-3).
Figure 2-3
7. Choose the Disable option on DHCP selection. See Figure 2-3.
To Next Page
Loading...
