NETGEAR ProSafe FS728TP - Viewing the Memory Logs

FS728TP Smart Switch Software User Manual
Configuring the Device Using Your Browser 5-44
v2.0, November 2006
Viewing the Memory Logs
The Memory Logs Page contains all system logs in a chronological order that are saved in RAM
(Cache).
To open the Memory Logs Page:
1. Click System > Logs > Memory Logs. The Memory Logs Page opens:
Figure 5-33
The Memory Logs Page contains the following fields:
– ID – Displays the log entry in the Memory Log table.
– Log Index – Displays the log number.
– Log Time – Displays the time at which the log was generated.
– Severity – Displays the log severity.
– Description – Displays the log message text.
2. Click . The Memory Logs are cleared, and the device is updated.