FS728TP Smart Switch Software User Manual
5-19 Configuring the Device Using Your Browser
v2.0, November 2006
Viewing EAP Statistics
The EAP Statistics Page contains information about EAP packets received on a specific port. To
view the EAP Statistics:
1. Click Switch > Security > Port Authentication > EAP Statistics. The EAP Statistics Page
opens:
Figure 5-20
The EAP Statistics Page contains the following fields:
– Port – Indicates the port, which is polled for statistics.
– Refresh Rate – Indicates the amount of time that passes before the EAP statistics are
refreshed. The possible field values are:
– 15 Seconds – Indicates that the EAP statistics are refreshed every 15 seconds.
– 30 Seconds – Indicates that the EAP statistics are refreshed every 30 seconds.
– 60 Seconds – Indicates that the EAP statistics are refreshed every 60 seconds.
– No Refresh – Indicates that the EAP statistics are not refreshed.
– Frames Receive – Indicates the number of valid EAPOL frames received on the port.
To Next Page
Loading...
