NETGEAR ProSafe FS728TP - Defining VLAN Properties

FS728TP Smart Switch Software User Manual
5-69 Configuring the Device Using Your Browser
v2.0, November 2006
Defining VLAN Properties
The VLAN Properties Page provides information and global parameters for configuring and
working with VLANs.
To define VLAN properties:
1. Click Switch > VLAN > Properties. The VLAN Properties Page opens:
Figure 5-46
The VLAN Properties Page contains the following fields:
– ID – Displays the VLAN ID. The field range is 1-4094.
– Name – Displays the user-defined VLAN name.
– Type – Displays the VLAN type. The possible field values are:
– Static – Indicates the VLAN is user-defined.
– Default – Indicates the VLAN is the default VLAN. The default VLAN is enabled by
default.
– Delete – Removes VLANs. The possible field values are:
– Checked – Removes the selected VLAN.