FS728TP Smart Switch Software User Manual
5-65 Configuring the Device Using Your Browser
v2.0, November 2006
Viewing LAG Membership
The LAG Membership Page allows network managers to assign ports LAGs.
To assign ports to LAGs:
1. Click Switch > LAG Configuration > LAG Membership. The LAG Membership Page
opens:
Figure 5-43
The LAG Membership Page contains the following fields:
– LAG Port – Displays the LAG number.
– Link State – Displays the LAG operational status. The possible field values are:
– Link Present – Indicates the LAG is currently linked and forwarding traffic.
– Link Not Present – Indicates the LAG is currently not linked.
– Member – Displays the ports that are attached to the LAG.
– Delete – Removes the selected LAG.
– Checked – Removes the selected LAG.
To Next Page
Loading...
