FS728TP Smart Switch Software User Manual
5-105 Configuring the Device Using Your Browser
v2.0, November 2006
Configuring SNMP Views
SNMP views provide or block access to device features or portions of features. For example, a
view can be defined which provides that SNMP group A has Read Only (R/O) access to Multicast
groups, while SNMP group B has Read-Write (R/W) access to Multicast groups. Feature access is
granted via the MIB name or MIB Object ID. To define SNMP views:
1. Switch > Advanced > SNMP > Views. The Views Page opens:
Figure 5-69
The Views Page contains the following fields:
– View Name – Displays the user-defined views. The view name can contain a maximum of
30 alphanumeric characters.
– ID –Indicates the View table entry number.
– Object ID Subtree – Displays the device feature OID included in or excluded from the
selected SNMP view.
– View Type – Indicates whether the defined OID branch will be included in or excluded
from the selected SNMP view.
– Delete – Deletes the currently selected view. The possible field values are:
To Next Page
Loading...
