NETGEAR FS108P - ProSafe Switch User Manual

JJA; Reviewed:
SPOC 5/17/2007
Solution & Interoperability Test Lab Application Notes
©2007 Avaya Inc. All Rights Reserved.
1 of 20
NETGEARAppNotes.doc
Avaya Solution & Interoperability Test Lab
Configuring NETGEAR® PROSAFE™ 8-port, 16-port and
24-port switches Supporting Power over Ethernet with
Avaya Communication Manager, Avaya one-X Quick
Edition G10 PSTN Gateway, Avaya one-X Quick Edition
Telephones and Avaya IP Telephones – Issue 1.0
Abstract
These Application Notes describe the configuration of the NETGEAR® PROSAFE™ 8 Port
FS108P, PROSAFE™ 16 Port FS116P and PROSAFE™ 24 Port FS726TP switch and Avaya
4600/9600 Series IP Telephones registered to Avaya Communication Manager and Avaya
one-X Quick Edition G10 PSTN Gateway.

NETGEAR FS108P - ProSafe Switch Specifications

General

Ports	8
PoE Support	Yes
Switching Capacity	1.6 Gbps
Forwarding Rate	1.19 Mpps
Jumbo Frame Support	No
PoE Ports	4 ports
Dimensions (mm)	43
Power Supply	External
Operating Temperature	0 to 50°C
Humidity	90% maximum relative, non-condensing
Weight (kg)	0.52 kg

Summary

1. Introduction

2. Equipment and Software

2.1. Configuration of NETGEAR and Avaya equipment

Details the network diagram and configuration of NETGEAR and Avaya equipment.

3. Configure the Avaya Media Server and Media Gateway

4. Configure the NETGEAR Switches

4.1. Using the NETGEAR FS108P and FS116P

Explains configuration for NETGEAR FS108P and FS116P unmanaged switches.

4.2. Configure the NETGEAR FS726TP

Outlines the configuration steps for the NETGEAR FS726TP switch.

4.2.1. Configure the NETGEAR FS726TP PoE

Details the Power over Ethernet (PoE) configuration for the NETGEAR FS726TP switch.

4.2.2. Configure the NETGEAR FS726TP Differentiated Services Values

Sets up DiffServ QoS values on the NETGEAR FS726TP for traffic prioritization.

4.2.3. Configure the Voice and Data VLAN for the FS726TP

Configures Voice VLAN 135 and Data VLAN 100 on the NETGEAR FS726TP.

4.2.5. Enable prioritization on the FS726TP

Enables 802.1P QoS prioritization for Avaya IP Telephones on the FS726TP.

4.2.6. Configure the Storm Control for the FS726TP

Configures storm control settings on the NETGEAR FS726TP to improve voice quality.

4.2.7. Configure the FS726TP for the Avaya one-X Quick Edition Telephones

Configures IGMP snooping for Avaya one-X Quick Edition Telephones on the FS726TP.

5. Configure the Avaya IP Telephones, Avaya one-X Quick Edition Telephones and the Avaya one-X Quick Edition G10 PSTN Gateway

5.1.1. Configure the Avaya IP Telephones for use with the Avaya Communication Manager

Configures Avaya IP Telephones for Avaya Communication Manager with IEEE 802.1Q/P enabled.

5.1.2. Configure the Avaya one-X Quick Edition Telephones and Avaya one-X Quick Edition G10 PSTN Gateway

Sets up VLAN settings for Avaya one-X Quick Edition Telephones and G10 PSTN Gateway.

6. Verification Steps

6.1. Verification Steps for Avaya IP Telephones and Avaya Communications Manager

Verifies audio quality and data connectivity for Avaya IP Telephones with Avaya Communication Manager.

6.2. Verification Steps for Avaya one-X Quick Edition Telephones and Avaya one-X G10 PSTN Gateway

Verifies audio and operational status of Avaya one-X Quick Edition Telephones and G10 Gateway.

6.3. Verification Steps for the FS726TP PoE

Checks PoE power delivery and port speed/duplex settings on the FS726TP.

6.4. Verification Steps for the FS726TP QoS

Tests traffic prioritization by verifying QoS and audio quality during throughput tests.

7. Conclusion

8. Additional References