Need help?Do you have a question about the NETGEAR GS724TS - ProSafe 24 Port Gigabit Stackable Smart Switch and is the answer not in the manual?
General| Model | GS724TS |
|---|---|
| Ports | 24 |
| Stacking | Yes |
| Switching Capacity | 48 Gbps |
| Forwarding Rate | 35.7 Mpps |
| VLAN Support | Yes |
| Layer | Layer 2 |
| Manageable | Yes |
| Power over Ethernet (PoE) | No |
| Quality of Service (QoS) | Yes |
| Form Factor | Rack-mountable |
| Power Supply | Internal |
| Jumbo Frame Support | Yes |
| Management | SNMP |
| Weight | 5.7 pounds |
| Operating Temperature | 0°C to 40°C |
| MAC Address Table Size | 16000 |
Introduces the web-based management and SmartWizard Discovery utility for switch configuration.
Guides on assigning static IP addresses or using DHCP for the switch's network management.
Covers managing multiple stacked units, including master election and configuration.
Explains Link Aggregation Group (LAG) configuration for optimizing port usage, bandwidth, and redundancy.
Details Virtual LAN (VLAN) configuration, including static and default VLANs, and membership settings.
Guides on configuring ports for Voice VLAN to enhance VoIP service quality and security.
Covers Spanning Tree Protocol (STP) configuration, including global settings, operation modes, and port states.
Details Quality of Service (QoS) configuration, including classification, action, and queue management.
Covers user configuration, RADIUS, TACACS+, and authentication list settings for secure access.
Explains 802.1x configuration and port authentication global properties for network access control.
Details Storm Control, Port Security, and Protected Ports configuration for managing network traffic and access.
Covers Access Control Lists (ACL) for defining classification actions and rules for ingress ports, including MAC, IPv4, and IPv6 ACLs.
To Next Page
