Need help?Do you have a question about the NETGEAR ProSafe GS728TP and is the answer not in the manual?
General| Switching Capacity | 56 Gbps |
|---|---|
| Forwarding Rate | 41.7 Mpps |
| MAC Address Table Size | 16K |
| VLAN Support | Yes, up to 256 VLANs |
| Ports | 4 x Gigabit SFP ports |
| PoE | Yes, 24 PoE+ ports with a total power budget of 192W |
| Quality of Service | Yes, 8 hardware queues per port |
| Security Features | IEEE 802.1x, ACL |
| Management | Web-based GUI, SNMP |
| Power Supply | Internal power supply |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Storage Temperature | -20°C to 70°C (-4°F to 158°F) |
| Humidity | 90% maximum relative humidity, non-condensing |
| Jumbo Frame Support | Yes, up to 9KB |
Overview of NETGEAR GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches.
Key features of the NETGEAR GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches.
List of items included in the package for the GS752TP, GS728TP, and GS728TPP Gigabit Smart Switch.
Details the front and back panel components and connectors of the GS752TP Gigabit Smart Switch.
Details the front and back panel components and connectors of the GS728TP Gigabit Smart Switch.
Details the front and back panel components and connectors of the GS728TPP Gigabit Smart Switch.
Explains the meaning of port LEDs and system LEDs on the switch for status indication.
Describes the RJ-45 and SFP ports, their capabilities, and connection types.
Illustrates and explains how to use the switch as a desktop device in a small network.
Illustrates and explains how to use the switch as a backbone device for high-speed access.
Details site requirements for temperature, humidity, ventilation, and mounting before switch installation.
Provides instructions for physically installing the switch on a flat surface or in a network rack.
Steps to inspect the equipment and verify correct cable installation and mounting security.
Procedure for connecting computers to the switch's RJ-45 ports using network cables.
Instructions for installing an optional SFP transceiver module into the switch's SFP ports.
Steps to connect and apply AC power to the switch, and troubleshooting power issues.
Procedure for connecting an external RPS DC power supply to the switch (GS728TPP only).
Guide on configuring and managing the switch via a web browser or the Smart Control Center utility.
Table of common switch symptoms, their causes, and recommended solutions for troubleshooting.
Provides additional suggestions for troubleshooting issues not covered in the main troubleshooting chart.
Details the network protocols and IEEE standards supported by the switch.
Covers management features, compatibility with operating systems and protocols like VLAN, SNMP.
Details the switch's interface specifications, including RJ-45 and SFP ports, and LED indicators.
Provides performance metrics like bandwidth, MAC address capacity, and PoE power budget.
Lists power supply voltage, frequency, amperage, and Mean Time Between Failure (MTBF) ratings.
Specifies the physical dimensions (H x W x D) and weight of the switch models.
Details operating and storage temperature and humidity requirements for the switch.
Covers compliance with electromagnetic emission standards and safety certifications.
General information on user requirements for operating the product in accordance with national laws.
Details FCC requirements, human exposure guidelines, and the Declaration of Conformity for the device.
Warnings and instructions regarding FCC radio frequency interference for the digital device.
Covers compliance with Canadian and European Union EMC and Low Voltage Directives.
Information regarding the GNU General Public License (GPL) included with the product.
To Next Page