NETGEAR ProSAFE Plus GS108Ev3

Installation
ProSAFE Plus 8-Port Gigabit Switch
GS108Ev3
Step 2. Connect to power.
Step 1. Connect the equipment.
Step 3. Check the status.
Power LED Port LEDs
On 1000 Mbps link (both LEDs)
O 100 Mbps (le LED)
10 Mbps (right LED)
Activity (blinking)
No link (o)
GS108Ev3 Optional router
Optional modem
Computer Server
Internet

NETGEAR ProSAFE Plus GS108Ev3 Specifications

General

Model	GS108Ev3
Category	Switch
Ports	8
Port Type	Gigabit Ethernet
VLAN Support	Yes
QoS	Yes
Switching Capacity	16 Gbps
Forwarding Rate	11.9 Mpps
MAC Address Table Size	4K
Power over Ethernet (PoE)	No
Fanless Design	Yes
Management	Web-based
Dimensions	158 x 101 x 29 mm
Power Supply	External
Mounting Type	Desktop or wall mount
Jumbo Frame Support	Yes

Summary

Installation Guide

Connect Equipment

Illustrates connecting computers, servers, modem, and router to the switch.

Connect to Power

Details the process of connecting the switch to an electrical power source.

Check Status Indicators

Explains how to interpret Power LED and Port LEDs for device status.

Set Up Switch Configuration Utility

Install Configuration Utility

Instructions for installing the management utility from the resource CD.

Configure the Switch

Steps to launch and utilize the utility for switch management and customization.

Product Specifications

Support Information