NETGEAR ProSAFE Plus GS105Ev2

Installation Guide
ProSAFE Plus 5-Port Gigabit Switch GS105Ev2
Step 2. Connect power.
Step 3. Check status.
On
Off
Power LED
Activity (blinking)
No link (off)
1000 Mbps link
(both LEDs)
Port LEDs
100 Mbps
(left LED)
Step 1. Connect equipment.
10 Mbps
(right LED)
GS105E switch Optional wireless access point
Computer Server

NETGEAR ProSAFE Plus GS105Ev2 Specifications

General

Model	GS105Ev2
Category	Switch
Ports	5
Port Type	Gigabit Ethernet
VLAN Support	Yes
QoS	Yes
Switching Capacity	10 Gbps
Forwarding Rate	7.4 Mpps
Storage Temperature	-20° to 70°C (-4° to 158°F)
Humidity	10% to 90% non-condensing
Certifications	CE, FCC, VCCI, C-Tick
Weight	0.26 kg
Power Supply	External
Jumbo Frame Support	9, 216 bytes
Operating Temperature	0° to 40°C
Management	Web-based
MAC Address Table Size	2000 entries

Summary

Step 1. Connect equipment

Step 2. Connect power

Step 3. Check status

Power LED Status

Describes the status of the power LED indicator, indicating if the device is on or off.

Port LED Status

Explains the status of port LEDs for link speed and activity, indicating connection status.

Set Up the Switch Configuration Utility

Specifications

Support