Need help?Do you have a question about the NETGEAR ProSafe GS108T and is the answer not in the manual?
General| Switching Capacity | 16 Gbps |
|---|---|
| VLAN Support | Yes |
| QoS | Yes |
| Model Number | GS108T |
| Managed | Yes |
| Forwarding Rate | 11.9 Mpps |
| PoE | No |
| Management | Web-based |
| Jumbo Frame Support | Yes |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
| Humidity | 90% maximum relative humidity, noncondensing |
| Ports | 8 x Gigabit Ethernet |
Describes the conventions, formats, and scope used within the manual for clarity.
Provides instructions on how to view and print PDF versions of the manual chapters or the complete document.
Provides an introduction to the GS108T Gigabit Smart Switch and its intended use.
Lists and describes the key features and capabilities of the GS108T Smart Switch.
Details the power-saving features implemented in the GS108T Smart Switch.
Lists all items included in the GS108T Gigabit Smart Switch package for verification.
Describes the physical layout of the front and back panels of the GS108T Smart Switch.
Explains the meaning and status indicated by the various LEDs on the switch.
Details the status indications for the system power and status LEDs.
Describes the physical ports and connectors, including RJ-45 and PoE-PD ports.
Explains how to use the reset button to reboot the switch or restore factory defaults.
Details the operation of the factory defaults button to reset all configurations.
Describes how the GS108T Smart Switch can be utilized for desktop network configurations.
Details the site requirements and preparation steps necessary before installing the switch.
Covers the procedures for physically installing the GS108T Smart Switch.
Provides instructions for placing the switch on a flat surface using the included rubber footpads.
Offers optional instructions for mounting the GS108T Smart Switch on a wall.
Outlines essential checks to perform after installation but before applying power.
Explains the process of connecting network devices to the switch's RJ-45 ports.
Details the procedures for powering on the switch using either an AC power source or PoE.
Describes how to configure and manage the switch's features via a web browser or a PC utility.
Lists common symptoms, their possible causes, and suggested solutions for troubleshooting.
Provides further guidance and tips for resolving issues not covered in the main troubleshooting chart.
Ensures network adapter cards in PCs are functional for effective troubleshooting.
Offers guidance on troubleshooting problems arising from network configuration changes.
Provides steps to verify the operational integrity of the switch, including resetting.
Explains the auto-negotiation feature for port speed and duplex mode.
Lists the network protocols and IEEE standards supported by the GS108T Smart Switch.
Details management features, compatible operating systems, and browser requirements.
Describes the physical interfaces, including RJ-45 connectors and their capabilities.
Details the type, function, and meaning of the LEDs on the switch.
Provides key performance metrics such as bandwidth, forwarding modes, and MAC address database size.
Specifies the power consumption, input voltage, and frequency requirements.
Lists the physical dimensions (H x W x D) and weight of the GS108T Smart Switch.
Details operating and storage temperature, humidity, and altitude limits.
Lists compliance standards related to electromagnetic emissions for the device.
Lists compliance standards related to product safety certifications.
To Next Page