NETGEAR ProSafe GS108T User Manual

v
v1.0, January 2010
About This Manual
The NETGEAR
®
ProSafe
TM
GS108T Hardware Installation Guide describes how to install and
power on the GS108T Smart Switch. The information in this manual is intended for readers with
intermediate computer and Internet skills.
Conventions, Formats and Scope
The conventions, formats, and scope of this manual are described in the following paragraphs:
• Typographical Conventions. This manual uses the following typographical conventions:
Italic Emphasis, books, CDs, file and server names, extensions
Bold User input, IP addresses, GUI screen text
Fixed Command prompt, CLI text, code
italic URL links
• Formats. This manual uses the following formats to highlight special messages:
Tip: This format is used to highlight a procedure that will save time or resources.
Warning: Ignoring this type of note may result in a malfunction or damage to the
equipment.
Note: This format is used to highlight information of importance or special interest.

NETGEAR ProSafe GS108T Specifications

General

Switching Capacity	16 Gbps
VLAN Support	Yes
QoS	Yes
Model Number	GS108T
Managed	Yes
Forwarding Rate	11.9 Mpps
PoE	No
Management	Web-based
Jumbo Frame Support	Yes
Operating Temperature	0°C to 40°C
Storage Temperature	-20°C to 70°C
Humidity	90% maximum relative humidity, noncondensing
Ports	8 x Gigabit Ethernet