NETGEAR ProSafe GS108T User Manual

2-1
v1.0, January 2010
Chapter 2
Physical Description
This chapter describes the GS108T Gigabit Smart Switch hardware features. Topics include:
• GS108T Front and Back Panel Configuration
• LED Designations
• Device Hardware Interfaces
GS108T Front and Back Panel Configuration
The GS108T Smart Switch is an eight-port 10/100/1000 Mbps Smart Switch. Every RJ-45 port is
capable of sensing the line speed and negotiating the operation duplex mode with the link partner
automatically
Figure 2-1 illustrates the NETGEAR GS108T Smart Switch front panel:
Power/Status LED
Link/Speed/ACT LEDs
10/100/1000 Mbps Ethernet Ports
Figure 2-1
The front panel contains the following:
• Eight RJ-45 connectors for 10/100/1000 Mbps auto-sensing Gigabit Ethernet switching ports
• Reset button to restart the device
• Recessed default reset button to restore the device back to the factory defaults
• Link, Speed, and Activity LEDs for each port
• Power and Status LED

NETGEAR ProSafe GS108T Specifications

General

Switching Capacity	16 Gbps
VLAN Support	Yes
QoS	Yes
Model Number	GS108T
Managed	Yes
Forwarding Rate	11.9 Mpps
PoE	No
Management	Web-based
Jumbo Frame Support	Yes
Operating Temperature	0°C to 40°C
Storage Temperature	-20°C to 70°C
Humidity	90% maximum relative humidity, noncondensing
Ports	8 x Gigabit Ethernet