To Next Page
T
tbergerJul 26, 2025
What to do if the port number light is not lit on my NETGEAR ProSafe Plus GS108E Switch?
- TtaylorericJul 26, 2025
If the port number light is not lit for a connected device or stays on continuously, it indicates a hardware connection problem. To resolve this: * Ensure the cable connectors are securely plugged into both the NETGEAR Switch and the connected device. * Verify that the connected device is powered on. * If using an Ethernet cable connected to a NIC or Ethernet adapter, confirm the card or adapter is correctly installed and functioning. * Confirm that the cable length does not exceed 328 feet (100 meters).
General
