NETGEAR ProSafe Plus GS105E User Manual

ProSafe Plus 5-Port Gigabit Switch GS105E
Step 2. Connect power Step 3. Check status
On
Off
Power LED
Optional
modem
Step 1. Connect equipment
GS105E
Optional router
Computer Server
Internet
Activity (blinking)
No link (off)
1000 Mbps link
(both LEDs)
(right LED)
10 Mbps link
Port LEDs
(left LED)
100 Mbps link
Installation Guide
GS105E_IG_24Sept12.fm Page 1 Monday, September 24, 2012 1:56 PM

NETGEAR ProSafe Plus GS105E Specifications

General

Model	GS105E
Category	Switch
Switch Type	Unmanaged
VLAN Support	Yes
QoS	Yes
Jumbo Frame Support	Yes
Switching Capacity	10 Gbps
Forwarding Rate	7.4 Mpps
Power over Ethernet (PoE)	No
Management	Web-based
Power Supply	External power adapter
Operating Temperature	0°C to 40°C
Storage Temperature	-20°C to 70°C
Humidity	90% maximum relative humidity, noncondensing
Ports	5 x 10/100/1000 Mbps RJ45

Summary

Initial Setup and Status Check

Connect Equipment

Guides users through connecting the switch to network devices like computers and servers.

Connect Power

Instructions for connecting the power adapter to the switch and the power source.

Check Status LEDs

Explains how to interpret Power and Port LEDs for device status.

Switch Configuration and Support

Set Up Switch Configuration Utility

Details on installing and using the utility for managing switch features.

Product Specifications

Lists the technical specifications of the GS105E Gigabit Switch.

Technical Support Information

Information on product registration, updates, and accessing technical support.