JJA; Reviewed:
SPOC 5/17/2007
Solution & Interoperability Test Lab Application Notes
©2007 Avaya Inc. All Rights Reserved.
14 of 20
NETGEARAppNotes.doc
4.2.6. Configure the Storm Control for the FS726TP
Broadcast storms can have an extraordinarily negative impact on voice quality. From the left
window in the NETGEAR Web page select Advanced, and Storm Control. In the right
window pull-down associated with Storm Control Status, select Broadcast Only. In the pull-
down associated with Threshold (bps), select 512K. Select Apply.
Figure 11: NETGEAR FS726TP Storm Control Configuration
4.2.7. Configure the FS726TP for the Avaya one-X Quick Edition Telephones
The Avaya one-X Quick Edition Telephones and G10 Gateway (QE) use multicast messages for
shared control. The telephones and the G10 Gateway are powered by PoE. The configuration
of the FS726TP needs two additional settings to support QE.
In the left hand menu of the NETGEAR Web Page select Advanced and then IGMP Snooping
Status. Disable both the IGMP Function and Block Unknown Multicast Address. Select
Apply.
Figure 12: NETGEAR FS726TP IGMP Configuration
To Next Page
Loading...
