FS728TP Smart Switch Software User Manual
Configuring the Device Using Your Browser 5-78
v2.0, November 2006
Configuring Static Addresses
To configure the static addresses:
1. Click System > Address Table > Static Addresses. The Static Addresses Page opens:
Figure 5-52
The Static Addresses Page contains the following fields:
– ID – Indicates the Static Address table entry.
– VLAN ID – Displays the VLAN ID number to which the entry refers.
– MAC Address – Displays the MAC address to which the entry refers.
– Interface – Displays the interface to which the entry refers:
– Status – Displays how the entry was created. The possible field values are:
– Secure – The MAC Address is defined for locked ports.
– Permanent – The MAC address is permanent.
– Delete on Reset – The MAC address is deleted when the device is reset.
– Delete on Timeout – The MAC address is deleted when a timeout occurs.
To Next Page
Loading...
