FS728TP Smart Switch Software User Manual
5-41 Configuring the Device Using Your Browser
v2.0, November 2006
Viewing System Logs
Event messages have a unique format, as per the SYSLOG RFC recommended message format for
all error reporting, for example, Syslog+ local device reporting. Messages are assigned a severity
code, and include a message mnemonic, which identifies the source application generating the
message. Messages are filtered based on their urgency or relevancy. The following table contains
the Log Severity Levels:
Table 6: Severity Levels
Severity Severity Level Severity Level
Emergency 0 Indicates that the system is not functioning.
Alert 1 Indicates that the system needs immediate
attention.
Critical 2 Indicates that the system is in a critical state.
Error 3 Indicates that a system error has occurred.
Warning 4 indicates that a system warning is logged.
Notice 5 Indicates that the system is functioning properly,
but system notice is logged.
Informational 6 Provides device information.
Debug 7 Provides detailed log information.
This section provides information for managing logs. The logs enable viewing device events in
real time, and recording the events for later usage. Logs record and manage events and report
errors and informational messages.
This section includes the following topics:
• Logs Configuration
• Viewing the Memory Logs
• Viewing the Flash Logs
• Viewing Server Logs
To Next Page
Loading...
