NETGEAR ProSafe FS728TP - Main Screen > Device Setting > Configuration Setting > Cancel; Main Screen> > Switch Setting> > Password Change

FS728TP Smart Switch Software User Manual
Smartwizard Discovery Program 3-6
v2.0, November 2006
Main Screen > Device Setting > Configuration Setting > Cancel
Click Cancel to abort the above settings.
Main Screen> > Switch Setting> > Password Change
1. Click Password Change from the Switch Setting chapter. The following screen appears as
shown in
Figure 3-4.
Figure 3-4
• New Password – Type any desired password. Passwords are case-sensitive and can have a
maximum of 20 characters.
• Confirm Password – Re-type the new password to confirm it.
• Old Password – The default password is ‘password’.
2. Click Set to enable new password.