FS728TP Smart Switch Software User Manual
Configuring the Device Using Your Browser 5-126
v2.0, November 2006
Configuring Multicast Forward All
The Bridge Multicast Forward All Page contains fields for attaching ports or LAGs to a device
that is attached to a neighboring Multicast router/switch. Once IGMP Snooping is enabled,
Multicast packets are forwarded to the appropriate port or VLAN. Unless LAGs are defined, only
a Multicast Forward All table displays.
To define Multicast forward all settings:
1. Click Switch > Advanced > Multicast > Multicast Forward All. The Multicast Forward All
Page opens:
Figure 5-84
The Multicast Forward All Page contains the following fields:
– VLAN ID – DIsplays the VLAN for which Multicast parameters are displayed.
– VLAN Name – Displays the user defined VLAN name.
– Interface – Displays ports that can be added to a Multicast service.
– Interface Status – Indicates the Interface status. The possible field values are:
– Static – Attaches the port to the Multicast router or switch as a static port.
To Next Page
Loading...
