NETGEAR ProSafe FS728TP - Configuring Interfaces; Defining Port Parameters

FS728TP Smart Switch Software User Manual
5-55 Configuring the Device Using Your Browser
v2.0, November 2006
Configuring Interfaces
This section contains information for configuring ports, LAGs, and VLANs and contains the
following topics:
• Defining Port Parameters
• Defining LAG Members
Defining Port Parameters
The Port Configuration Page contains fields for defining port parameters.
To define port parameters:
1. Click Switch > Port Configuration. The Port Configuration Page opens:
Figure 5-39
The Port Configuration Page contains the following fields:
– Interface – Displays the port number.
– Port Description – Provides a user-defined device description.