NETGEAR ProSafe FS728TP User Manual

FS728TP Smart Switch Software User Manual
5-111 Configuring the Device Using Your Browser
v2.0, November 2006
Configuring Trap Station Management
The Trap Station Management Page contains information for defining filters that determine
whether traps are sent to specific users, and the trap type sent. SNMP notification filters provide
the following services:
• Identifying Management Trap Targets
• Trap Filtering
• Selecting Trap Generation Parameters
• Providing Access Control Checks
To define trap station management:
1. Click Switch > Advanced > SNMP > Trap Station Management. The Trap Station
Management Page opens:
The Trap Station Management Page is divided into the following tables:
– SNMPv1, 2 Notification Recipient
Figure 5-74

NETGEAR ProSafe FS728TP Specifications

General

Model	FS728TP
PoE Ports	24
PoE Budget	192W
Switching Capacity	12.8 Gbps
Forwarding Rate	9.5 Mpps
MAC Address Table Size	8K
VLAN Support	Yes
QoS	Yes
Rack Mountable	Yes
Jumbo Frame Support	Yes
Power Supply	Internal
Humidity	10% to 90% non-condensing
Management	Web-based, SNMP
Dimensions	440 x 43 mm
Operating Temperature	0°C to 40°C
Weight	3.7 kg