FS728TP Smart Switch Software User Manual
Configuring the Device Using Your Browser 5-108
v2.0, November 2006
– Community String – Defines the password used to authenticate the management station
to the device.
– Access Mode – Defines the access rights of the community. The possible field values are:
– Read Only – Management access is restricted to read-only. Changes cannot be made to
the community.
– Read Write – Management access is read-write. Changes can be made to the device
configuration but not to the community.
– SNMP Admin – User has access to all device configuration options, as well as
permissions to modify the community.
– View Name – Contains a list of user-defined SNMP views.
– Delete – Removes a community. The possible field values are:
– Checked – Removes the selected SNMP community.
– Unchecked – Maintains the SNMP communities.
SNMP Communities Advanced Table
The SNMP Communities Advanced Table contains the following fields:
– ID – Indicates the table entry number.
– Management Station – Displays the management station IP address for which the
advanced SNMP community is defined.
– Community String – Defines the password used to authenticate the management station
to the device.
– Group Name – Defines advanced SNMP community group names.
– Delete – Removes a community. The possible field values are:
– Checked – Removes the selected SNMP communities.
– Unchecked – Maintains the SNMP communities.
To Next Page
Loading...
