NETGEAR KWGR614 - Page 2

Dynamic DNS ez-ipupdate 3.0.11b7 user/ez-ipupdate-3.0.11b7
Web Server BOA 0.94 user/boa
UPNP Copyright 2005, DNI 1.0.0 user/upnp
Telstra's Big
Pond
Bpalogin V2.0 user/bpalogin
Email Smtpclient 1.0.0 user/smtpclient
Schedule Crond of Busybox V1.00-
pre2
1.0.0 user/busybox/miscutils/crond.c
PPP/PPPoE Pppd 2.3.8 user/pppd
PPTP Client pptp-client 1.3.1 user/pptp-client
Ntpclient Copyright 2005, DNI 1.0.0 user/ntpclient
Miscellaneous Copyright 2005, DNI 1.0.0 user/dniutil, user/init
Wireless driver Copyright Realtek 1.12 linux-
2.4.x/drivers/net/wireless/rtl8185
L2TP l2tpd 0.69 user/l2tpd
Iptables iptables 1.2.7a user/iptables
Making a Console Debug Interface for the KWGR614 Router
This section provides instructions on how to make a console interface to a NETGEAR
KWGR614 wireless router for the developer’s firmware development and debugging.
The following example schematic illustrates using a MAX3232, the RS-232 Line
Driver/Receiver from Texas Instruments (TI), to make a console board.
You can download a datasheet for the MAX3232.from the Texas Instruments website at:
http://focus.ti.com/lit/ds/symlink/max3232.pdf
.