NETGEAR MR814 - LAN IP Setup; LAN TCP;IP Setup

Reference Manual for the Model MR814 Wireless Router
Advanced Configuration of the Router 8-7
8.
Click Apply to save your configuration.
LAN IP Setup
The second feature category under the Advanced heading is LAN IP Setup. This menu allows
configuration of LAN IP services such as DHCP and RIP. From the Main Menu of the browser
interface, under Advanced, click on LAN IP Setup to view the LAN IP Setup menu, shown in
Figure 8-3
Figure 8-3. LAN IP Setup Menu
LAN TCP/IP Setup
The router is shipped preconfigured to use private IP addresses on the LAN side, and to act.as a
DHCP server. The router’s default LAN IP configuration is:
Note: If your ISP assigns a private WAN IP address (such as 192.168.x.x or 10.x.x.x),
the dynamic DNS service will not work because private addresses will not be routed on
the Internet.