NETGEAR N300 DGN2200v4

8
Join the Wireless Network
You can use either the Wi-Fi Protected Setup (WPS) method or the
manual method to join your wireless network.
 T
o join the network using WPS:
1. Pr
ess the WPS button on the modem router.
2. Within 2 m
inutes, press the WPS button on your wireless computer
or device, or follow the WPS instructions that came with your
wireless device to complete the WPS process.
Note: Som
e older wireless computers or devices cannot use WPS.
 T
o join the network manually:
1. On yo
ur computer or wireless device, open the software that
manages its wireless connections.
This software scans for all wirele
ss networks in your area.
2. Loo
k for the WiFi network name (SSID) and select it. The SSID is
on the label on the bottom of the modem router.
If you changed the name of your network during the setup
p
rocess, look for that network name.
3. Enter the pre
set password (or your custom password if you
changed it), and click Connect.