14
Note: If your USB device requires a power supply, you must use it
when connecting your USB device to a NETGEAR router or gateway.
It might take up to 2 minutes before the USB drive is ready for sharing
after it is connected to the router.
To access your USB device:
On Windows systems:
1. Use any of these methods to open the ReadySHARE web page:
• Select Start > Run and enter \\readyshare in the dialog box.
Click OK.
• Open Explorer or Safari and enter \\readyshare in the
address bar.
• Open My Network Places and enter \\readyshare in the
address bar.
• From the ReadySHARE web page, download the
ReadyShareConnect.exe file:
• Under ReadySHARE® USB Storage Access,
click PC Utility.
• In the pop-up window, select Run or Save to run
or save the ReadyShareConnect.exe file.
On Mac systems
1. Select Go > Connect to Server.
2. Enter smb://readyshare as the server address.
3. Click Connect.
To Next Page
Loading...
