NETGEAR N450

Other manuals for NETGEAR N450

Datasheet2 pages

Installation Guide2 pages

Questions and Answers:

L
Laurie BuchananJul 26, 2025
What to do if I cannot access the NETGEAR N450 configuration?
- I
  icampbellJul 26, 2025
  If you cannot access the modem router configuration through your browser, verify that your computer’s IP address is on the same subnet as the modem router. Check the connection from your computer to the modem router and reboot your computer. Ensure that your browser has Java, JavaScript, or ActiveX enabled. Try quitting and relaunching your browser. Also, make sure you are using the correct login information: the username is 'admin' and the default password is 'password', both in lowercase.
S
Scott SolisJul 31, 2025
What to do if LAN LED is off for a port with Ethernet connection on NETGEAR N450 Wireless Router?
- J
  joseph68Jul 31, 2025
  If the LAN LED is off for a port with an Ethernet connection, ensure that the Ethernet cable connections are securely connected to both the modem router and the hub or computer. Check that power is turned on to the connected hub or computer. Also, make sure you are using the correct cable.
J
Jaclyn WhiteAug 5, 2025
How to fix NETGEAR N450 when all LEDs are off?
- C
  Caitlin HatfieldAug 5, 2025
  If all LEDs are off when the modem router is plugged in, ensure that the power cord is properly connected to your modem router and that the power supply adapter is properly connected to a functioning power outlet. Check that you are using the 12 V DC power adapter supplied by NETGEAR for this product. If the error persists, you have a hardware problem. Contact technical support.
T
theresahillAug 10, 2025
Why is the Internet LED off on my NETGEAR Wireless Router?
- M
  Matthew GambleAug 10, 2025
  If the Internet LED is off and your NETGEAR Wireless Router is connected to the cable television cable, make sure that the coaxial cable connections are secure both at the router and the wall jack. Also, ensure that your cable service provider has provisioned your cable Internet service. Remove any excessive splitters on your cable line, or run a 'home run' back to where the cable enters your home.
A
Alexis ThomasAug 15, 2025
How to fix NETGEAR N450 Wireless Router not saving changes?
- M
  mcphersonmeaganAug 15, 2025
  If your modem router isn't saving the changes you've made, make sure to click the Apply button before navigating to another screen; otherwise, your changes will be lost. You can also click the Refresh or Reload button in your web browser, as the browser might be caching the old configuration.
A
Andrea MunozAug 20, 2025
What to do if all LEDs are on NETGEAR Wireless Router?
- L
  Larry GilbertAug 20, 2025
  If all the LEDs on your NETGEAR Wireless Router stay on, clear the modem router’s configuration to factory defaults. If the error persists, you might have a hardware problem and need to contact technical support.

NETGEAR N450 Specifications

General

Wi-Fi band	Single-band (2.4 GHz)
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
WLAN data transfer rate (max)	450 Mbit/s
USB port	Yes
USB 2.0 ports quantity	2
Ethernet LAN (RJ-45) ports	4
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Security algorithms	WPA, WPA2, WPA2-PSK, WPS
Cables included	LAN (RJ-45)
Product type	Tabletop router
Product color	Black
DSL WAN	No
Power source type	DC