NETGEAR N450 User Manual

Connecting to the Internet
7
N450 WiFi Cable Modem Router Model N450/CG3000Dv2
Front Panel
The router front panel has the following status LEDs and buttons:
Figure 2. Modem router front view
You can use the LEDs to verify status and connections. The following table lists and describes
each LED and button on the front panel of the modem router.
Table 1. LEDs and buttons
LED Description
Power
• Solid green. The modem router has power.
• Blinking green. The modem router is powering on.
• Blinking red. The modem router is performing a self-test or the thermal cutoff circuit has
been triggered.
• Off. The modem router is not receiving power.
Downstream
• Solid blue. More than one downstream channel is locked.
• Solid green. One downstream channel is locked.
• Blinking green. The modem router is scanning for a downstream channel.
• Off. No downstream channel is locked.
WPS LED
Wireless LED
USB port
Power LED
Downstream LED
Upstream LED
Internet LED
LAN LEDs

NETGEAR N450 Specifications

General

Wi-Fi band	Single-band (2.4 GHz)
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Top Wi-Fi standard	Wi-Fi 4 (802.11n)
WLAN data transfer rate (max)	450 Mbit/s
USB port	Yes
USB 2.0 ports quantity	2
Ethernet LAN (RJ-45) ports	4
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN interface type	Gigabit Ethernet
Security algorithms	WPA, WPA2, WPA2-PSK, WPS
Cables included	LAN (RJ-45)
Product type	Tabletop router
Product color	Black
DSL WAN	No
Power source type	DC

Weight and Dimensions

Depth	93 mm
Width	165 mm
Height	259 mm
Weight	590 g