16
ReadySHARE Printer
ReadySHARE Printer lets you connect a USB printer to the router
USB port and access it wirelessly.
To set up ReadySHARE Printer:
1. Connect the USB printer to the router USB port with a USB
printer cable.
2. On each computer that will share the printer:
a. Install the current USB printer driver software (available from
the printer manufacturer).
b. Download and install the NETGEAR USB Control Center
utility (available in the ReadySHARE Printer area at
www.netgear.com/readyshare).
Note
• You must install this utility before you can use the
ReadySHARE Printer feature.
• For the ReadySHARE Printer feature to work, this
utility must be run in the background.
c. Click Easy to Set-up: Instructions, and follow the
instructions.
To Next Page
Loading...
