c. Check to see if a micro SIM card was inserted into the SIM card slot.
If a micro SIM card was inserted, skip to Step e. If a micro SIM card was not inserted, locate the micro-SIM card and continue with Step d.
To get a valid and provisioned SIM card, contact your mobile provider.
d. Carefully slide the micro-SIM card into the slot.
e. Align the battery connectors and insert the battery.
f. If you purchased a micro SD card, insert the card into the micro SD slot.
g. Replace the mobile router cover.
2. Download the NETGEAR Mobile app.
Use the NETGEAR Mobile app to change your WiFi network name and password. You can also use it to play and share media, and enable the travel router feature.
a. Connect your mobile device to the Internet.
b. Download the NETGEAR Mobile app from netgear.com/mobileapps.
3. Power on your mobile router.
Press and hold the Power button on the mobile router for three seconds.
To view the WiFi name and password, press and release the Power button to
toggle through Nighthawk M1 router LCD displays.
4. Connect your devices.
a. Check to make sure that WiFi is enabled on your computer or mobile device and search for WiFi networks. Refer to the following table or the manual for your WiFi-
enabled device for further details on searching for WiFi networks.
To Next Page
Loading...
Need help?
General
