Need help?Do you have a question about the NETGEAR Nighthawk RAX80 and is the answer not in the manual?
General| Beamforming | Yes |
|---|---|
| MU-MIMO | Yes |
| OFDMA | Yes |
| WiFi Technology | 802.11ax |
| WiFi Speed | 6 Gbps |
| Bands | Dual-band (2.4 GHz & 5 GHz) |
| Processor | 1.8GHz Quad-Core Processor |
| Ethernet Ports | 5 (1 WAN & 4 LAN Gigabit ports) |
| USB Ports | 2 x USB 3.0 |
| Antennas | 8 high-performance antennas |
| Security | WPA2/WPA3, VPN, Guest WiFi access |
| Memory | 512MB NAND Flash and 1GB DDR3 RAM |
Explains the status LEDs, buttons on the top panel, and connectors on the rear panel.
Covers wired Ethernet, WiFi, and WPS connections to the router.
Details accessing the router via web browser, understanding login types, and using the Nighthawk app.
Guides on using the Internet Setup Wizard and manually configuring connection settings.
Details changing LAN IP settings, managing DHCP server, and IP address reservations.
Instructions for configuring WiFi basic settings, modes, security, guest networks, and schedules.
Guides on enabling and managing Dynamic QoS to optimize Internet traffic.
Instructions for updating router firmware and managing admin account security.
Explains Dynamic DNS and how to set it up for remote network access.
Addresses issues with LEDs, login failures, internet access, and browsing problems.
To Next Page
