Nighthawk AX8 8-Stream AX6000 WiFi Router
Manage Network Settings 77 User Manual
c. In the Security Options section, select a radio button.
d. If the Password (Network Key) field displays, type the WiFi password (network key) that
you use to connect wirelessly to the other router.
8. Click the Apply button.
The window closes and you are returned to the main Wireless Settings page.
9. Click the Apply button on the main Wireless Settings page.
Your settings are saved.
Ethernet Port Aggregation
Ethernet aggregation lets aggregate two Ethernet ports on your router to improve the aggregated
file transfer speed.
To set up Ethernet port aggregation, connect a device that supports Ethernet port aggregation
and 802.3ad to Ethernet aggregate ports 4 and 5 on your router. Note that Ethernet port
aggregation is also referred to as link aggregation, teaming port, and port trunking.
WARNING: To avoid causing broadcast looping, which can shut down your network, do not
connect an unmanaged switch to Ethernet ports 4 and 5 on your router.
Figure 7. Ethernet port aggregation
Set Up Ethernet Port Aggregation
If you are connecting a switch, make sure that your switch supports 802.3ad LACP.
To set up Ethernet port aggregation:
1. Set up Ethernet port aggregation on your device before connecting it to your router.
To Next Page
Loading...
Need help?
General
