Nighthawk AX8 8-Stream AX6000 WiFi Router
Manage Your Router 98 User Manual
5. Follow the direction of your browser to save the file.
A copy of the current settings is saved in the location that you specified.
Erase the Settings
CAUTION: This process erases all settings that you configured in the router.
To erase the settings:
1. Launch a web browser from a computer or mobile device that is connected to the router
network.
2. Enter the router user name and password.
The user name is admin. The password is the one that you specified the first time that you
logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
3. Select ADVANCED > Administration > Backup Settings. The Backup Settings page displays.
4. Click the Erase button.
The configuration is reset to factory default settings. When the reset is complete, the router
restarts. This process takes about two minutes.
WARNING: To avoid the risk of corrupting the firmware, do not interrupt the reset. For
example, do not close the browser, click a link, or load a new page. Do not turn off the router.
Wait until the router finishes restarting.
Restore Configuration Settings
To restore configuration settings that you backed up:
1. Launch a web browser from a computer or mobile device that is connected to the router
network.
2. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time that you
logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
3. Select ADVANCED > Administration > Backup Settings. The Backup Settings page displays.
4. Click the Browse button to find and select the .cfg file.
To Next Page
Loading...
Need help?
General
