Nighthawk AX8 8-Stream AX6000 WiFi Router
Manage Network Settings 74 User Manual
7. Click the Apply button.
Your settings are saved.
Delete a static route
To delete a static route:
1. Launch a web browser from a computer or mobile device that is connected to the router
network.
2. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time that you
logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
3. Select ADVANCED > Advanced Setup > Static Routes. The Static Routes page displays.
4. In the table, select the radio button for the route.
5. Click the Delete button.
The route is removed from the table.
Enable or disable implicit beamforming
Implicit beamforming means that the router can use information from client devices that support
beamforming to improve the WiFi signal.
To enable or disable implicit beamforming:
1. Launch a web browser from a computer or mobile device that is connected to the router
network.
A login window opens.
2. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time that you
logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
3. Select ADVANCED > Advanced Setup > Wireless Settings. The Wireless Settings page displays.
4. Scroll down below the WPS Settings section and select or clear the Enable Implicit
BEAMFORMING check box.
To Next Page
Loading...
Need help?
General
