NETGEAR Nighthawk RAX80 - Factory Settings

Nighthawk AX8 8-Stream AX6000 WiFi Router
Supplemental Information 156 User Manual
Factory Settings
You can return the router to its factory settings. Use the end of a paper clip or a similar object
to press and hold the Reset button on the back of the router for at least seven seconds. The
router resets and returns to the factory configuration settings shown in the following table.
Table 3. Factory default settings
Feature
Default setting
Router login
User login URL
www.routerlogin.com or www.routerlogin.net
User name (case-sensitive)
admin
Login password (case-sensitive)
password
Internet
connection
WAN MAC address
Use default hardware address
WAN MTU size
1500
Local network
(LAN)
LAN IP
192.168.1.1
Subnet mask
255.255.255.0
DHCP server
Enabled
DHCP range
192.168.1.2 to 192.168.1.254
Time zone
Pacific time
DHCP starting IP address
192.168.1.2
DHCP ending IP address
192.168.1.254
Time adjusted for daylight saving
time
Disabled
SNMP
Disabled