NETGEAR Nighthawk RAX80 User Manual

9
1
Hardware Setup
This chapter contains the following sections:
• Unpack Your Router • Top Panel LEDs and Buttons • Rear Panel • Extend the
Antennas • Router Label • Position Your Router • Cable Your Router • Turn the LEDs
On or Off Using the LED On/Off Switch
For more information about the topics covered in this manual, visit the support website at
netgear.com/support.
Unpack Your Router
Your package contains the router, the power adapter, and an Ethernet cable.
Figure 1. Package contents

NETGEAR Nighthawk RAX80 Specifications

General

Beamforming	Yes
MU-MIMO	Yes
OFDMA	Yes
WiFi Technology	802.11ax
WiFi Speed	6 Gbps
Bands	Dual-band (2.4 GHz & 5 GHz)
Processor	1.8GHz Quad-Core Processor
Ethernet Ports	5 (1 WAN & 4 LAN Gigabit ports)
USB Ports	2 x USB 3.0
Antennas	8 high-performance antennas
Security	WPA2/WPA3, VPN, Guest WiFi access
Memory	512MB NAND Flash and 1GB DDR3 RAM