Nighthawk AX8 8-Stream AX6000 WiFi Router
Share USB Storage Devices 107 User Manual
Attached to the Router
3. Select Start > Run.
4. Enter \\readyshare in the dialog box.
5. Click the OK button.
A window automatically opens and displays the files and folders on the USB storage device.
Map a USB Device to a Windows Network Drive
To map the USB storage device to a Windows network drive:
1. Connect a USB storage device to a USB port on your router.
2. If your USB storage device uses a power supply, connect it.
You must use the power supply when you connect the USB storage device to the router.
When you connect the USB storage device to the router’s port, it might take up to two
minutes before it is ready for sharing. By default, the USB storage device is available to all
computers on your local area network (LAN).
3. Select Start > Run.
4. Enter \\readyshare in the dialog box.
5. Click the OK button.
A window automatically opens and displays the USB storage device.
6. Right-click the USB device and select Map network drive. The Map Network Drive window
opens.
7. Select the drive letter to map to the new network folder.
8. Click the Finish button.
The USB storage device is mapped to the drive letter that you specified.
9. To connect to the USB storage device as a different user, select the Connect using different
credentials check box, click the Finish button, and do the following: a. Type the user name
and password.
b. Click the OK button.
To Next Page
Loading...
Need help?
General
