Need help?Do you have a question about the NETGEAR Nighthawk RAX29 and is the answer not in the manual?
General| Wi-Fi Standard | Wi-Fi 6 (802.11ax) |
|---|---|
| Wi-Fi Performance | AX3000 |
| USB Ports | 1 x USB 3.0 port |
| RAM | 512 MB |
| Flash Memory | 256 MB |
| Antenna | 4 External Antennas |
| Beamforming | Yes |
| MU-MIMO | Yes |
| OFDMA | Yes |
| Maximum Speed | 3 Gbps |
| Frequency Bands | Dual-Band (2.4 GHz and 5 GHz) |
| Processor | Triple-Core Processor |
| Security | WPA3 |
| Ethernet Ports | 5 x 10/100/1000 Mbps Gigabit Ethernet ports (1 WAN and 4 LAN) |
Outlines methods for connecting devices via wired Ethernet, WiFi, or WPS.
Guides on using a web browser to access the router's web interface for setup.
Automated process to detect and configure Internet connection settings.
Step-by-step guide for manually setting up Internet connection parameters.
Set rules to allow or block specific devices from accessing the Internet.
Adjust Wide Area Network settings, including port scan protection and DMZ.
Configure WiFi network name (SSID), security options, channel, and broadcast settings.
Enhance network performance by prioritizing traffic for gaming, streaming, and VoIP.
Instructions for checking, downloading, and installing router firmware updates.
Secure your router by changing the administrator login password.
Return the router to its original factory settings using the reset button or erase function.
Steps for connecting USB flash drives or hard drives to the router.
Guides on establishing a secure Virtual Private Network (VPN) connection to your router.
Steps to troubleshoot and fix problems preventing Internet connectivity.
To Next Page