NETGEAR Nighthawk R7200 User Manual

Rear Panel
The back panel of the router provides ports, buttons, antenna connectors, and a DC
power connector. For information about attaching the antennas, see Attach the Antennas
on page 11.
Figure 2. Router back panel
In addition to the three antenna connectors, viewed from left to right, the back panel
contains the following components:
•
Reset button. For information about using the Reset button, see Return the router
to its factory default settings on page 103.
•
Ethernet LAN ports. Use the four Gigabit Ethernet RJ-45 LAN ports to connect the
router to LAN devices.
•
Internet port. Use the yellow Gigabit Ethernet RJ-45 Internet WAN port to connect
the router to a modem.
•
Power On/Off button. Press the Power On/Off button to provide power to the
router.
•
DC power connector. Connect the power adapter that came in the product package
to the DC power connector.
User Manual13Hardware Overview of the
Router
Nighthawk AC2100 Smart WiFi Router Model R7200

NETGEAR Nighthawk R7200 Specifications

General

Brand	NETGEAR
Model	Nighthawk R7200
Category	Network Router
Language	English