NETGEAR Nighthawk AC1900 D7000v2 User Manual

Nighthawk AC1900 WiFi
VDSL/ADSL Modem Router
Model D7000v2
User Manual
Model D7000v2
December 2017
202-11737-02
350 E. Plumeria Drive
San Jose, CA 95134
USA

NETGEAR Nighthawk AC1900 D7000v2 Specifications

General

WiFi Performance	AC1900 (600 + 1300 Mbps)
WiFi Range	Large homes
Memory	128 MB Flash and 256 MB RAM
Frequency Band	2.4GHz and 5GHz
Beamforming+	Yes
Smart Connect	Yes
Guest Network	Yes
VPN Support	Yes
Parental Controls	Yes
Quality of Service (QoS)	Yes
WiFi Technology	802.11ac
Number of Ethernet Ports	4 x Gigabit Ethernet
Number of USB Ports	2 (USB 2.0 and USB 3.0)
Processor	Dual-core 1GHz
Security Features	WPA/WPA2
Wireless Standard	802.11 a/b/g/n/ac
Ports	4 Gigabit Ethernet, 2 USB
Modem Type	VDSL/ADSL

Summary

Hardware Overview of the Modem Router

Install and Access the Modem Router and Its Network

Set Up Your Modem Router for DSL Service

Guide for configuring the modem router for DSL internet service connections.

Set Up the Modem Router for Cable or Fiber Service

Guide for configuring the modem router for cable or fiber internet service.

Change the admin Password

Security recommendation to change the default administrator password.

Manage the Internet Settings Manually

Manually Set Up ADSL Connection

Detailed steps for configuring ADSL internet connection settings.

Manually Set Up VDSL Connection

Detailed steps for configuring VDSL internet connection settings.

Manually Set Up Cable or Fiber Connection

Detailed steps for configuring cable or fiber internet connection.

Manage the WiFi Network Settings

Basic WiFi Settings & Security (Main Network)

Configuration of SSID, security, and encryption for the primary WiFi.

Control Access to the Internet

Set Up Parental Controls

Configuration of internet access restrictions for child safety.

Allow or Block Network Access

Defining rules to permit or deny device access to the network via MAC address.

Manage Outbound Firewall Rules

Optimize Performance

Optimize Traffic with QoS

Using Quality of Service to prioritize internet traffic and applications.

Manage Dynamic DNS and Access Storage Devices Through the Internet

Set Up and Manage Dynamic DNS

Configuring Dynamic DNS for remote network access using a domain name.

Access Storage Devices Remotely via Internet

Manage the WAN and LAN Network Settings

Manage WAN Security Settings

Configuring firewall settings like port scan and DoS protection.

Set Up Default DMZ Server

Manage the Modem Router and Monitor the Traffic

Update the Firmware of the Modem Router

Checking for and installing the latest firmware for the modem router.

Recover the admin Password

Procedure to reset or recover the administrator password if forgotten.

Return Modem Router to Factory Default Settings

Resetting the modem router to its original configuration.

Monitor and Meter Internet Traffic

Use VPN to Access Your Network

Set Up a VPN Connection

Configuring the modem router to act as a VPN gateway for secure remote access.

Install OpenVPN Software on Windows/Mac

Use VPN to Access Internet Service at Home

Connecting to your home internet service remotely via VPN.

Manage Port Forwarding and Port Triggering

Manage Port Forwarding for Services/Applications

Setting up rules to direct incoming traffic to specific devices.

Add Custom Port Forwarding Rule

Manage Port Triggering for Services/Applications

Configuring rules for dynamic port opening based on traffic.

Troubleshooting

Quick Tips for Troubleshooting

Cannot Log In to Modem Router

Steps to resolve issues preventing access to the router's web interface.

Troubleshoot Internet Connection

Diagnosing and resolving problems with the internet connectivity.

Troubleshoot WiFi Connectivity